Using this pneumatic table you can significantly improve both productivity and the quality of furniture. Lifting table with pneumatic drive. For general use in the upholstery industry, for manufacturing of upholstered furniture.
- The height of the lifting table can be adjusted during the manufacturing process;
- The table is supported with a steel frame, pneumatic cylinder and control valve;
- The table is foot-controlled at both sides of the table;
- The table has a connection (output) for pneumatic devices
- After the table is cut off from the power supply, it is automatically blocked (if the power supply is cut off, the table top will not drop);
- The table has a drawer for storing basic upholstery tools.  

The table structure is made of steel. The pneumatic cylinder D125x600 is foot-controlled at both sides of the table. Leverage raises the table top to a maximum height of 1280 mm and lowers it to 300 mm. The particle board table top is covered with high-quality fitted carpet and furnished with stainless steel slide blocks which help to move furniture pieces on the table as well as grounding electrostatic charges. Prevention of electrostatic charges avoids the occurrence of sparks and fire.

Model:    ST-3
Working pressure:    6 bar (87 PSI)
Tabletop dimensions:    2000 mm x 900 mm (78.74" x 35.43") 
Pneumatic cylinder:    D125x600
Minimum height:    320 mm (12.59")
Maximum height:    1280 mm (50.39")
Maximum load:    160 kg (352.74 lbs)

Key features:  
- Rewinding / inspection machines with backlighting screen provide fast, easy quality control and measure fabric length.
- Machines can have a built-in lay manual (version /R) or semi-automatic (version /A) end-cutter for increased efficiency in the workplace.
- A perfect choice for all textile manufacturers and businesses that deal with any kind of fabric.
- The machine winds fabric from a roll placed inside the cradle on a core placed on a winding shaft.
- High winding speed (50 m/min or 60 m/min).
- Mechanical counter (yards or meters).
- Easy fabric roll installation.
- Frame made of powder-coated steel.  

Available models:  
PP-3S Rewinding-inspection machine with backlight and more powerful winding unit (from the roll cradle onto the tube), and length measurement device. PP-3S/R Additionally equipped with manual fabric end cutter OT-1/R. PP-3S/A Additionally equipped with semi-automatic fabric end cutter OT-1/A.  

Specifications:  

Model:    PP-3S 
Maximum width of fabric roll:    190 cm (74,80")
Maximum roll diameter:    50 cm (19,69")
Maximum rewindable weight of roll:    70[kg]
Voltage:    230[V]
Wattage:    0,55[kW]
Maximum winding speed:    50-60 m/min
Screen size:    200 x 50 cm (78.74" x 19.68")
Screen:     Yes
Сounter for yards or meters:    Yes
Cradle for roll:    Yes

Key features:   '
- Cutting room table SK-3 with UL-3 spreading head designed for manual fabric spreading and preparing cutting packages for vertical or round knives cutting.
- The machine is equipped with: cutting room table SK-3, spreading head UL-3, fabric end clamp LD-1, fabric end cutter OT-1/A and mechanical cut counter.
- Spreading head with tray for textile pile spreading (optional).
- Turnable spreading head (optional).
- Power cable on wire rope (optional).
- Table with air-cushion (optional UL-3/AIR).

- Standard width: 1.83 m or 2.07 m.
- Standard lengths are: 2.8 m, 3.9 m, 5 m, 6.1 m, 7.2 m, 8.3 m, 9.4 m, 10.5 m, 11.6 m, 12.7 m, 13.8 m, 14.9 m, and 16 m (6.56 ft, 9.84 ft, 16.4 ft, 19.68 ft, 22.96 ft, 26.24 ft, 29.52 ft, 

Key features:  
- Table is made of closed steel profiles that provide good durability and stability.
- Tabletop is made of laminated white chipboard 25 mm thick.
- Tabletop is finished with aluminium angles.
- Each tabletop connection is supported by profile underneath.
- Table has adjustable setting for leveling.
- Table can be easily extended at any time.
- Table can be supplied with special castors with brakes (optional).
- Table can be supplied with air cushion (optional SK-3/AIR) 
- Table of any size can be produced.
- Table can be supplied with bottom shelf (optional).

- Standard width of table: 1.83 m or 2.07 m (72.0" or 78.7").
- Standard lengths are: 2.8 m, 3.9 m, 5 m, 6.1 m, 7.2 m, 8.3 m, 9.4 m, 10.5 m, 11.6 m, 12.7 m, 13.8 m, 14.9 m, and 16 m (6.56 ft, 9.84 ft, 16.4 ft, 19.68 ft, 22.96 ft, 26.24 ft, 29.52 ft, 32.8 ft, 36.08 ft, 39.37 ft, 42.65 ft, 45.93 ft, and 52.49 ft).

Band knife machines R1000/R750 are versatile tools for cutting medium-sized stacks of material.

Key features:

- The band knife machine is a powerful and versatile tool for cutting fabric, leather, cardboard, upholstery foam, rubber or paper.
- Any band knife can be used with this device (straight, convex, concave or toothed).
- Smooth or airflow-equipped tabletops.
- Each machine is equipped with a knife sharpener and a dust-collecting tray covered with transparent casing.
- A solid construction made of powder-coated steel.
- An liftable telescopic cover allows for a quick adjustment of the cutting height with a push of a button.
- All machines are equipped with a mechanical band catcher and the panels are protected with end switchers.
- (Optional) vacuum system for removing dust and material pieces during cutting.
- (Optional) adjustable manual positioner (side stop) with a scale for cutting stacked pieces of material
(R1250, R1150, R1000 and R750 only).

Specifications:

Model: R1000
Tabletop dimensions: 1800 x 1800 mm (70.85" x 70.85")
Overall dimensions (LxWxH): 2250 x 1800 x 1850 mm (88.6" x 70.85" x 72.85")
Cutting height: 250 mm (9.84")
Band length: 4250 mm (167.3")
Arm length: 1000 mm (39.35")
Knife speed: 0-18 m/s (59 ft/s)
Guide wheels quantity: 3
Voltage (optional 230 V / 50 Hz): 400 V / 50 Hz
Motor Power (optional 2,2 kW): 1.5 kW
Inverter for speed variation: Yes
Tabletop with air-cushion or smooth: Yes
Sharpening device: Yes
Operating light: Yes, LED lights
Mechanical bandknife catcher: Yes
Vacuum system (optional): Yes
Touchscreen control panel: No
Control panel with buttons: Yes
Castors for easier installation: Yes
Measuring stop PR-3 (optional): Yes